Desktop Mounting
The device can be placed on a desktop when its four anti-slide bumpers (supplied) are attached to the underside of the device.
|
➢
|
To attach the anti-slide rubber bumpers to the device: |
|
1.
|
Flip the device over so that its underside faces up. |
|
2.
|
Locate the four anti-slide grooves on the underside - one in each corner. |
|
3.
|
Peel off the adhesive, anti-slide rubber feet and stick one in each anti-slide groove. |
Location for Applying Rubber Feet
|
●
|
1 = Mounted anti-slide rubber feet |
|
4.
|
Flip the device over again so that it rests on the rubber feet and place it in the required position on a desktop. |